FPGA/Artix-7-35T

Datei:Artix 7 Front 1.png

Artix-7 FPGA Board

Datei:Artix 7 Back 1.png

Artix-7 FPGA Board

Digilent Arty Artix-7

The Digilent Artix-7 is a small, 48-pin DIP form factor board built around a Xilinx Artix 7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad SPI Flash, and basic I/O devices. These components make it a formidable, albeit compact, platform for digital logic circuits and Microblaze embedded softcore processor designs alike. There are 44 Digital FPGA I/O signals and 2 FPGA Analog inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate your programmable logic design directly into a solderless breadboard circuit. At just .7” by 2.75” inches, it can also be loaded in a standard socket and used in embedded systems.

Spezifikation

• Artix-7 35T (LUTs 20.800 / Flip-flops 20.800)
• Block RAM 225KB
• SRAM 512KB (8-bit Bus, 8ns)
• Quad-SPI Flash 4MB
• Pmod Connector
• Connector 48-pin DIP (44 Digital I/O, 2 Analog inputs 0-3.3V)
• 2 Taster
• 2 LEDs
• 1 RGB LED

Dokumentation

• Arty Artix-7 Reference Manual
• Arty Artix-7 Schematic
• Artix 7 Datasheet
• Xilinx 7 Series FPGAs Overview

WEB Links

• Digilent CMod A7 Wiki
• CMod A7 Programming Guide
• Cmod A7 Reference Manual