FPGA/Artix-7-35T: Unterschied zwischen den Versionen

Aus
Wechseln zu: Navigation, Suche
 
(Eine dazwischenliegende Version desselben Benutzers wird nicht angezeigt)
Zeile 1: Zeile 1:
 
[[Bild:Artix_7_Front_1.jpg|right|thumb|200px|Artix-7 FPGA Board]]
 
[[Bild:Artix_7_Front_1.jpg|right|thumb|200px|Artix-7 FPGA Board]]
[[Bild:Artix_7_Back_1.jpg|right|thumb|200px|Artix-7 FPGA Board]]
+
[[Bild:Artix 7 back 1.jpg|right|thumb|200px|Artix-7 FPGA Board]]
 
__NOTOC__<br />
 
__NOTOC__<br />
 
== Digilent Arty Artix-7 ==
 
== Digilent Arty Artix-7 ==
  
The Digilent Artix-7 is a small, 48-pin DIP form factor board built around a Xilinx Artix 7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad SPI Flash, and basic I/O devices. These components make it a formidable, albeit compact, platform for digital logic circuits and Microblaze embedded softcore processor designs alike. There are 44 Digital FPGA I/O signals and 2 FPGA Analog inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate your programmable logic design directly into a solderless breadboard circuit. At just .7” by 2.75” inches, it can also be loaded in a standard socket and used in embedded systems.  
+
The Arty A7, formerly known as the Arty, is a ready-to-use development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. It was designed specifically for use as a MicroBlaze Soft Processing System. When used in this context, the Arty A7 becomes the most flexible processing platform you could hope to add to your collection, capable of adapting to whatever your project requires. Unlike other Single Board Computers, the Arty A7 isn't bound to a single set of processing peripherals: One moment it's a communication powerhouse chock-full of UARTs, SPIs, IICs, and an Ethernet MAC, and the next it's a meticulous timekeeper with a dozen 32-bit timers.  
  
 
<br />
 
<br />
 
=== Spezifikation ===
 
=== Spezifikation ===
  
* Artix-7 35T (LUTs 20.800 / Flip-flops 20.800)  
+
* Artix-7 35T (XC7A35TICSG324-1L - Logic Slices 5.200, DSP Slices 90)  
* Block RAM 225KB
+
* Internal Clock 450 MHz+
* SRAM 512KB (8-bit Bus, 8ns)
+
* Block RAM 1.800 Kbits
* Quad-SPI Flash 4MB
+
* DDR3 256 MB @ 667 MHz
* Pmod Connector  
+
* Quad-SPI Flash 16MB
 +
* Ethernet 10/100 Mbps
 +
* Shield Connector Arduino / chipKIT compatible
 +
* 4 x Pmod Connector  
 
* Connector 48-pin DIP (44 Digital I/O, 2 Analog inputs 0-3.3V)  
 
* Connector 48-pin DIP (44 Digital I/O, 2 Analog inputs 0-3.3V)  
* 2 Taster
+
* 4 Schalter
* 2 LEDs  
+
* 4 Taster
* 1 RGB LED   
+
* 4 User LEDs  
 +
* 4 User RGB LED   
  
 
<br />
 
<br />
Zeile 24: Zeile 28:
 
* [[Media:Arty artix7 rm.pdf|Arty Artix-7 Reference Manual]]
 
* [[Media:Arty artix7 rm.pdf|Arty Artix-7 Reference Manual]]
 
* [[Media:Arty artix7 rm.pdf|Arty Artix-7 Schematic]]
 
* [[Media:Arty artix7 rm.pdf|Arty Artix-7 Schematic]]
 +
* [[Media:ARTY_ARTIX_7_ENTWICKLUNGSBOA_410_319_DGL.pdf|Arty A7 Board Reference Manual]]
 
* [[Media:Ds181 Artix 7 Data Sheet.pdf|Artix 7 Datasheet]]
 
* [[Media:Ds181 Artix 7 Data Sheet.pdf|Artix 7 Datasheet]]
 
* [[Media:Ds180 7Series Overview.pdf|Xilinx 7 Series FPGAs Overview]]
 
* [[Media:Ds180 7Series Overview.pdf|Xilinx 7 Series FPGAs Overview]]
Zeile 31: Zeile 36:
 
=== WEB Links ===
 
=== WEB Links ===
  
* [https://reference.digilentinc.com/reference/programmable-logic/cmod-a7/start Digilent CMod A7 Wiki]
+
* [https://reference.digilentinc.com/reference/programmable-logic/arty-a7/start Arty A7 Homepage]
* [https://reference.digilentinc.com/learn/programmable-logic/tutorials/cmod-a7-programming-guide/start CMod A7 Programming Guide]
 
* [https://reference.digilentinc.com/reference/programmable-logic/cmod-a7/reference-manual Cmod A7 Reference Manual]
 

Aktuelle Version vom 23. September 2019, 16:34 Uhr

Artix-7 FPGA Board
Artix-7 FPGA Board


Digilent Arty Artix-7

The Arty A7, formerly known as the Arty, is a ready-to-use development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. It was designed specifically for use as a MicroBlaze Soft Processing System. When used in this context, the Arty A7 becomes the most flexible processing platform you could hope to add to your collection, capable of adapting to whatever your project requires. Unlike other Single Board Computers, the Arty A7 isn't bound to a single set of processing peripherals: One moment it's a communication powerhouse chock-full of UARTs, SPIs, IICs, and an Ethernet MAC, and the next it's a meticulous timekeeper with a dozen 32-bit timers.


Spezifikation

  • Artix-7 35T (XC7A35TICSG324-1L - Logic Slices 5.200, DSP Slices 90)
  • Internal Clock 450 MHz+
  • Block RAM 1.800 Kbits
  • DDR3 256 MB @ 667 MHz
  • Quad-SPI Flash 16MB
  • Ethernet 10/100 Mbps
  • Shield Connector Arduino / chipKIT compatible
  • 4 x Pmod Connector
  • Connector 48-pin DIP (44 Digital I/O, 2 Analog inputs 0-3.3V)
  • 4 Schalter
  • 4 Taster
  • 4 User LEDs
  • 4 User RGB LED


Dokumentation


WEB Links