Floppy-Controller: Unterschied zwischen den Versionen
Tw (Diskussion | Beiträge) |
Tw (Diskussion | Beiträge) (→Nessecary Hardware) |
||
| Zeile 10: | Zeile 10: | ||
=== Nessecary Hardware === | === Nessecary Hardware === | ||
| + | |||
* an old 1541 or 1541-II Floppy Drive | * an old 1541 or 1541-II Floppy Drive | ||
| − | * optionally a | + | * optionally a [[TrackDuino]] hardware (for track display) |
| − | |||
* an Arduino Nano [3€] | * an Arduino Nano [3€] | ||
* an OLED 128x64 display [3€] | * an OLED 128x64 display [3€] | ||
* optionally a I2C LCD display instead of OLED | * optionally a I2C LCD display instead of OLED | ||
* a Rotary Encoder [1€] | * a Rotary Encoder [1€] | ||
| − | |||
=== Nessecary Software === | === Nessecary Software === | ||
Version vom 23. August 2019, 15:09 Uhr
Inhaltsverzeichnis
Floppy-Controller
Controller board for a Commodore 1541 floppy drive
This is Hardware Extension for a 1541 Floppy Drive. (The 1541 is a retro hardware from Commodore)
Nessecary Hardware
- an old 1541 or 1541-II Floppy Drive
- optionally a TrackDuino hardware (for track display)
- an Arduino Nano [3€]
- an OLED 128x64 display [3€]
- optionally a I2C LCD display instead of OLED
- a Rotary Encoder [1€]
Nessecary Software
- Arduino Workbench
- Arduino Lib: LCD Menu Lib 2: https://github.com/Jomelo/LCDMenuLib2
- Arduino Lib: U8g2lib: u8g2 Lib
Features
- Write protection switch (read only, write always, auto)
- ROM selector (switch between up to 4 DOS Kernal)
- Select device number from 8 to 11
- settings are saved in Eprom of the Arduino
- Info Display
